Sun Microsystems STOREDGE A5000, Инструкция по установке и обслуживанию

Страница: 129 / 146

Appendix D Firmware and Device Driver Error Messages D-3
D.2 Message Formats
Error indications from the disk array drivers (
sf
and
socal
) are always sent to
syslog (
/var/adm/messages
). Additionally, depending on the type of event that
generated the message, it may be sent to the console. These messages are limited to
significant events like cable disconnections.
Messages to the console are in the following form:
The syslog messages may contain additional text.
The above message ID identifies the message, its producer, and its severity.:
For example:
The messages in this appendix are shown with the message ID and the message text,
even though the message ID is not displayed on the console. The character “
#”
stands for a numeric quantity, and “
...”
stands for a string of characters or
numbers. The prefix “
ID[SUNWssa]”
is implied and not shown.
For example, the last message in the previous example will be shown as:
[WARNING:] instance:
message
ID[SUNWssa.socal.messageid.XXXX] instance:
message
WARNING: /sbus@6,0/SUNW,socal@d,10000/sf@0,0 (sf0): Transport
error on target=0x30: Fibre Channel CRC Error on frames
ID[SUNWssa.socal.link.6010] socal0: port 1: Fibre Channel Loop is
ONLINE
socal.link.6010 socal#: port #: Fibre Channel Loop is ONLINE