Sun Microsystems StorageTek 5320, Руководство по началу работы

Страница: 60 / 226

40 Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006
b. Insert the right side of the tool into the front end of the right rail, while sliding
the end of the rail to the right or left as needed to allow the ends of the tool to
enter the ends of both rails.
The distance between the rails is now equal to the width of the server with
mounting brackets.
c. Tighten the screws to lock the ends of the rails in place.
d. At the back of the rack, repeat Step a through Step c for the back ends of the
rails.
9. Deploy the anti-tilt bar, if the chassis or rack is so equipped.
Caution – The weight of the server on extended slide rails can be enough to
overturn a cabinet.
10. Insert the ends of the mounting brackets into the sliding rails (
FIGURE 2-20
).
Caution – The server weighs approximately 52 pounds (24 kg). Two people are
required to lift and mount the system into a rack enclosure when using the
procedures in this chapter.