4-SHELF EXTRA-WIDE GALVANIZED STEEL
FLOOR CABINET
MODEL NO:
GSC110385.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
GENERAL SAFETY
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this cabinet.
9
Locate cabinet in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
WARNING!
Use cabinet on level and solid ground, preferably concrete.
9
Keep the cabinet clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
8
DO NOT
use the cabinet for any purpose other than that for which it is designed.
8
DO NOT
use the cabinet outdoors.
8
DO NOT
place the cabinet in a damp or wet location or an area where there is condensation.
8
DO NOT
clean the cabinet with any solvents which may damage the surfaces or the protective coating.
8
DO NOT
move the cabinet when there are items placed inside.
8
DO NOT
step on the shelves.
8
DO NOT
overload the cabinet.
2. INTRODUCTION
Floor standing galvanized steel cabinet with lockable double doors. Fitted with four adjustable shelves and base storage. Supplied
with four keys. Ideal for factory, workshop or home use. Features two rear wiring grommets allowing power tool batteries and other
devices to be charged whilst in storage. Floor cabinet is supplied flat-packed and will need some assembly.
3. SPECIFICATION
Model No ...................................................... GSC110385.V3
Overall Size (W x D x H) ..................... 1100 x 400 x 1830mm
Shelf Size (W x D x H) ............................1095 x 370 x 20mm
Shelves ................................................................................4
4. ASSEMBLY
4.1.
Unpack the unit and confirm that all the parts listed (fig.1).
4.2.
Assemble the unit on a solid level surface.
4.3.
The assistance of a second person will be required.
4.4.
To assemble the unit you will require a rubber mallet and a cross-head screwdriver.
4.5.
Where practical fix unit to a wall for extra strength and durability.
GSC110385.V3 Issue 1 19/03/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear protective
gloves
