Sun Microsystems StorageTek 5320, Руководство по началу работы

Страница: 181 / 226

Chapter 5 Installing the Sun StorageTek 5320 NAS Gateway System 161
The dual-server Sun StorageTek 5320 NAS Gateway Cluster System is commonly
configured with four on-board copper gigabit ports and two dual-port Gigabit
Ethernet cards (
FIGURE 5-42
).
FIGURE 5-42
Dual Server HA NIC Ports
▼
To Connect the Health-Monitoring Cable
●
Use an RJ-45 unshielded twisted-pair cable to connect the two servers’ NET0
heartbeat ports.
▼
To Connect to a Fast Ethernet or Gigabit Ethernet Network
●
Connect a Cat5 (for a 100BASE-T network) or Cat5e (for a 1000BASE-T network)
Ethernet cable from your LAN to the NIC NET1, NET2, or NET3 port on the back
of each of the servers (see
FIGURE 5-42
for NIC port locations).
▼
To Connect to an Optical Gigabit Ethernet Network
●
Connect an optical network cable from the network to the top (LINK A) and
connect another optical network cable from the network to the bottom (LINK B)
optical Gigabit Ethernet connector on the back of each of the servers (see
FIGURE 5-42
for NIC and optical Gigabit Ethernet port locations).
Powering On the Sun StorageTek 5320
NAS Gateway System
Before you proceed with initializing the system, you should power on the Sun
StorageTek 5320 NAS Gateway System or NAS Gateway Cluster System.
LINK B
Optical Gigabit Ethernet card
LINK A
Port NET0 Port NET1
Port NET2
Port NET3