Sun Microsystems StorageTek 5320, Руководство по началу работы

Страница: 88 / 226

68 Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006
▼
To Power On the Sun StorageTek 5320 NAS
Appliance System
1. Verify that all cables between the Sun StorageTek 5320 NAS Appliance, controller
enclosures, and expansion enclosures are properly secured according to the
instructions in
“Connecting the Sun StorageTek 5320 NAS Appliance to Controller
Enclosures” on page 54 and “Connecting Controller Enclosures to Expansion
Enclosures” on page 59 .
2. Power on each expansion enclosure by setting the two power supply switches to
the On position.
3. Check that all LEDs on the expansion enclosure front panels turn solid green to
indicate good operation.
4. Power on each controller enclosure by setting the two power supply switches to
the On position.
5. Check that all LEDs on the controller enclosure front panels turn solid green to
indicate good operation.
6. Verify that the Sun StorageTek 5320 NAS Appliance is connected to the network.