Sun Microsystems Netra 240, Руководство по обслуживанию

Страница: 145 / 154

Appendix C System Configuration Card and OpenBoot Configuration Parameters 127
screen-#rows 34
Sets number of rows on screen.
ttya-mode 9600,8,n,1,- ttya
(baud rate, #bits, parity, #stop,
handshake).
ttyb-mode 9600,8,n,1,- ttyb
(baud rate, #bits, parity, #stop,
handshake).
output-device ttya
Console output device.
input-device ttya
Console input device.
auto-boot-on-error? false
If
true
, boots client program on firmware
error/s. If
false
, does not boot on
firmware error.
load-base 16384
Address.
auto-boot? true
If
true
, boots automatically after power on
or reset.
boot-command boot
Action following a
boot
command.
diag-file none
File from which to boot if
diag-switch?
is
true
.
diag-device net
Device from which to boot if
diag-
switch?
is
true
.
boot-file none
File to boot if
diag-switch?
is
false
.
boot-device disk net
Device(s) from which to boot if
diag-
switch?
is
false
.
use-nvramrc? false
If
true
, executes commands in NVRAMRC
during server startup.
nvramrc none
Command script to execute if
use-
nvramrc?
is
true
.
security-mode none
Firmware security level (options:
none
,
command
, or
full
).
security-password none
Firmware security password if
security-
mode
is not
none
(never displayed). Do not
set this directly.
security-#badlogins none
Number of incorrect security password
attempts.
post-trigger power-on-
reset
Matches the class of reset.
diag-script none
Determines which devices are tested by
OpenBoot diagnostics.
TABLE C-1
OpenBoot PROM Configuration Parameters Stored on the System
Configuration Card
(Continued)
Parameter Default Description