Sun Microsystems Fire X4540, Руководство администратора

Страница: 85 / 154

Chapter 8 Introduction to the Sun Fire X4540 Server 71
Disk Drive and Fan Tray LEDs
FIGURE 8-4
shows the location of the internal LEDs.
FIGURE 8-5
shows a close-up view of the disk drive and fan trays, including the
symbols that identify the LEDs.
7 SVC Service buttons SP – Reset Service Processor.
NMI – Non-Maskable Interrupt dump. Sends an NMI to the
CPU. Used for debugging only.
Host – Reset Host Bus Adapter.
Do not use these buttons unless instructed by Sun service
personnel. To operate these buttons, insert a stylus or a
straightened paper clip into the recess.
8 SC - System controller
status LEDs Blue – Ready to remove.
Amber – Fault, service action required.
Green – Operational, no action required.
9 SER MGT Serial management port (serial connection to service
processor).
10 NET MGT (S) Net management and service processor port.
11 10/100/1000 GigabitEthernet ports connect server to Ethernet.
12 USB connectors Connect USB devices.
13 Video connector Connect video monitor.
14 Compact flash (CF)
card Insert compact flash card devices.
TABLE 8-3
Rear Panel Features (Continued)
# Name Description