Sun Microsystems Fire X4540, Руководство администратора

Страница: 80 / 154

66 Sun Fire X4500/ X4540 Servers Administration Guide • October 2008
TABLE 8-1
Summary of X4540 Server Features
Feature or
Component
Sun Fire X4540 Server
CPU Two AMD Opteron 2000 Series CPUs, Quad-Core, 2-socket
configuration
Processor BIOS 8-Mb Flash with LPC interface.
Memory 16 DIMM slots (8 per processor), up to 4 GB per DIMM (64 GB per
system). 128-bit DDR2 interface (2x64-bit data+2x8-bit ECC)
Hard disk drives
(HDDs) Up to forty-eight 3.5 SATA drives, of 250/500/750GB/1TB capacity
each (over 48 TB total system capacity), supports SATA II, 3.0Gb/s.
Service Processor Integrated Lights Out Manager (ILOM).
Refer to the ILOM documentation (see the
Integrated Lights Out
Manager (ILOM) Administration Guide (819-0280).
RAID options RAID is configured through software.
Network I/O • Four 10/100/1000BASE-T Gigabit Ethernet ports (RJ-45 connectors)
• One 10/100BASE-T Ethernet net management port (RJ-45
Connector) NET MGT
• One RS-232 serial port (RJ-45 Connector) SER MGT (see Serial Port)
Serial Port RS-232 serial interface, RJ45 connector
Console only, no modem support (no RI, PPP)
Connected to ILOM by default
Default parameters
• 9600 baud
• 8 data bits
• No parity
• 1 stop bit
• No flow control
PCI I/O Three PCI-e slots, 8-laneslot (x8), LSI SAS 1068E.
• Six SATA Controllers on IO Board, LSI SATA controller x 6. Each
controller supports 8 HDDs
• 51.5 mm (2.5 inches) maximum height
• 169.3 mm (6.7 inches) maximum length