Sun Microsystems Fire X4540, Руководство администратора

Страница: 124 / 154

110 Sun Fire X4500/ X4540 Servers Administration Guide • October 2008
fmdump
Command
The
fmdump
command displays the list of faults detected by the FMA. You can use
this command for the following reasons:
■
To see if any faults have been detected by the FMA.
■
If you need to obtain the fault message ID (SUNW-MSG-ID) for detected faults.
■
To verify that the replacement of a FRU has cleared the fault and not generated
any additional faults.
For more information, see the
fmdump
(1M) man page.
Using the fmdump Command to Identify Faults
●
Check the event log by typing the
fmdump
command with
-v
for verbose
output. For example:
The following is an example of information that is displayed. In this example, a fault
is displayed, providing details about the date, time, and unique identifier related to
the fault:
# fmdump -v
CODE EXAMPLE 12-1 fmdump
Command Verbose Output
TIME UUID SUNW-MSG-ID
Jul 11 13:55:01.5548 e92f2cec-e393-cd04-89ff-c5e2081b9940 DISK-
8000-0X
100% fault.io.disk.predictive-failure
Problem in: hc:///:serial=VDK41BT4C7MB7S:part=HITACHI-
HDS7225SBSUN250G-527N7MB7S:revision=V44OA81A/motherboard=
0/hostbridge=2/pcibus=9/pcidev=8/pcifn=0/pcibus=11/pcidev=
1/pcifn=0/sata-port=1/disk=0
Affects: hc:///:serial=VDK41BT4C7MB7S/component=sata5/1
FRU: hc:///component=HD_ID_16