Sun Microsystems Fire V125, Руководство по установке

Страница: 27 / 30

Chapter 3 Powering On and Configuring the Server 15
6. If prompted, specify the IP address for the system.
The system prompts you for this address if you declined to use DHCP in Step 3 . It
also asks you whether the server is to be part of a subnet, and if you answer Yes it
prompts you to provide the netmask of the subnet.
7. Specify whether you need IPv6 enabled, and then follow the instructions on the
screen.
8. Specify whether you want to enable the Kerberos Security mechanism, and then
follow the instructions on the screen.
9. Specify the name service you want the server to use.
10. Specify the name of the domain of which the server will be a part.
11. Specify whether you want the system to search the network for a name server or
whether you want it to use a particular name server.
12. If you chose to use a particular name server, specify the host name and IP address
of the name server.
13. At the name server prompt, create entries in the network administration files for
the system you are setting up.
14. At the prompt for the system you are setting up, follow the prompts to provide
time and date information.
15. When prompted, give a password (if any) for users logging in as the superuser.
▼ To Configure a Standalone Server for the First
Time
1. Specify the type of terminal you are using to communicate with the server.
2. When prompted to indicate whether you want the server to be networked, specify
No.
3. Specify a host name for the server.
4. Confirm the information you have given.
5. Specify the date and time information.
6. When prompted, give a password (if any) for users logging in as the superuser.