Sun Microsystems Fire V125, Руководство по установке

Страница: 14 / 30

2 Sun Fire V125 Server Installation Guide • September 2006
4. Set up a console to communicate with the server.
You can communicate with the Sun Fire server using either a TIP connection from
another server or an ASCII terminal connected to the SERIAL MGT port. To set
up the console, refer to the
Sun Fire V125 Server Adminstration Guide .
5. Power on and configure the server.
The Solaris 10 Operating System (Solaris OS) and the Java™ Enterprise System
are preinstalled on the server. When you power the server on, you will
automatically be taken through the Solaris OS configuration procedure. However,
you must first go to the preinstalled software site for the latest updates and
patches.
To power the server on and configure the preinstalled software, see “Powering On
the Server” on page 11 .
6. Set the desired OpenBoot PROM configuration options.
The initial boot will test the entire system. You can change the level of testing by
using the OpenBoot PROM commands and configuration variables. To change the
boot test level and other boot variables, see the
OpenBoot PROM Enhancements
Operations .
7. Load additional software from the Solaris media kit (optional).
The Solaris OS media kit includes several CDs containing software to help you
operate, configure, and administer your server. See the documentation provided
with the media kit for a complete listing of included software and detailed
installation instructions.
Verifying the Contents of the Shipping
Kit
The server is supplied with several components. Ensure that all the parts are present
in the shipping kit. If any components are missing, contact your Sun sales
representative.
■
Rackmount kit
■
Cat5 RJ-45 cable
■
Accessories kit
■
RJ-45 to DB-9 adapter
■
RJ-45 to DB-25 adapter
■
Sun product documentation