Sun Microsystems Fire V125, Руководство по установке

Страница: 20 / 30

8 Sun Fire V125 Server Installation Guide • September 2006
▼
To Attach the Slide Rail Assemblies to the Rack
1. Position a slide rail assembly in your rack so that the brackets at each end of the
slide rail assembly are on the outside of the front and rear rack posts (as depicted
in
FIGURE 2-2
).
2. Attach the slide rail assembly to the rack posts.
The method used to attach the slide rails varies depending on the type of rack:
■
If your rack has threaded mounting holes in the rack posts, determine whether
the threads are metric or standard, then insert the correct mounting screws
through the slide rail brackets and into the threaded holes.
■
If your rack does not have threaded mounting holes, insert the mounting screws
through both the slide rail brackets and rack posts, then secure them with the
caged nuts.
FIGURE 2-2
Slide Rail Assembly Mounting to Rack Post
3. Repeat for the remaining slide rail assembly.