Sun Microsystems Fire V125, Руководство по установке

Страница: 15 / 30

Chapter 1 Introduction to the Sun Fire V125 Server Installation 3
Note –
The contents of the shipping kit might vary, depending on any options you
ordered. Ensure that all the basic parts, as described in the list, are present in the
shipping kit.
Using the Sun Advanced Lights Out
Manager Software
The Sun Fire V125 server ships with the Sun Advanced Lights Out Manager (ALOM)
software installed. The system console is directed to ALOM by default and is
configured to show server console information on startup.
ALOM enables you to monitor and control your server over either a serial
connection (using the SERIAL MGT port) or an Ethernet connection (using the NET
MGT port).
Note –
The ALOM serial port, labelled SERIAL MGT, is for server management
only. If you need a general purpose serial port, use the serial port labeled 10101.
ALOM can be configured to send email notification of hardware failures and other
events related to the server or to ALOM.
The ALOM circuitry uses standby power from the server. This means that:
■
ALOM is active as soon as the server is connected to a power source, and remains
active until power is removed by unplugging the power cable.
■
ALOM continues to be effective even when the operating system is offline and
when the server is in Standby mode.
For more information about ALOM, see the Sun Advanced Lights Out Management
(ALOM) 1.6 Administration Guide .