Sun Microsystems Fire V125, Руководство по установке

Страница: 24 / 30

12 Sun Fire V125 Server Installation Guide • September 2006
▼
To Power On From the Keyboard
1. Connect the server to the power supply.
The server automatically goes into Standby power mode when it is connected to a
power source.
2. Set up a connection to the SERIAL MGT port.
For details, refer to the Sun Fire V125 Server Administration Guide .
When you switch to the ALOM prompt after initial power on, you will be logged in
as the admin user and prompted to set a password. You must set this password to
execute certain commands.
3. If you are prompted to do so, set a password for the
admin
user.
The password must:
■
Contain at least two alphabetic characters
■
Contain at least one numeric or one special character
■
Be at least six characters long
After the password is set, the
admin
user has full permissions and can execute all
ALOM command-line interface (CLI) commands.
4. Turn on power to any peripherals and external storage devices you have connected
to the server.
Read the documentation supplied with the device for specific instructions.
5. At the console prompt, type the following command to power on the server:
6. At the console prompt, type the following to access the server:
sc>
poweron
sc> console