Sun Microsystems Blade X6275M2-BB, Руководство по установке

Страница: 43 / 56

Tip –
The default ILOM administrator account user name is
root
and the password is
changeme
.
If this default administrator account has been changed, contact your system administrator for
an ILOM user account with administrator privileges.
Enter the network configuration settings for your static IP address.
Substitute the static IP address and the network configuration information to be changed. To
see the current configurations, use the
show
command in
/CH/BL4/NODE0/SP/network
.
For example, you might enter the following commands:
-> cd /CH/BL4/NODE0/SP/network
-> set pendingipaddress=129.144.82.26
-> set pendingipnetmask=255.255.255.0
-> set pendingipgateway=129.144.82.254
-> set pendingipdiscovery=static
-> set commitpending=true
Repeat Step 3 to configure the server's other node.
For example, if you have already configured
NODE0
, you would then enter the commands to
configure
NODE1
.
To log out of CMM ILOM, enter the command:
-> exit
■
“Accessing the Host Console Through ILOM” on page 43
■
“Installing a Supported OS” on page 49
Accessing the Host Console Through ILOM
Connecting to the host console through ILOM allows you to perform actions as if you were at
the host. This can be useful when you need remote access to the server's BIOS setup program, or
when you install an OS or other software on the server.
Choose one of the following methods:
■
Using the serial console through the ILOM command-line interface. See “How to Connect
to the Host’s Serial Console Using the ILOM Command-Line Interface” on page 44 .
■
Using the remote console feature of the ILOM web interface. See “How to Connect to the
Host Console Using the ILOM Web Interface” on page 44 .
3
4
5
See Also
Accessing the Host Console Through ILOM
43