Sun Microsystems Blade X6275M2-BB Скачать руководство пользователя | Manualshive

Страница: 49 / 56

background image

Installing a Supported OS

Finish the installation of your server module by installing a supported operating system (OS) on
a boot device for each node.

Note –

The installed OS can be different for each node.

Choose one of the following options for installing an OS:

■

Install the OS on the server module node's optional internal flash module (FMod).

Refer to the appropriate Sun Blade X6275 M2 server module OS installation guide for more
information on using this option.

■

Install the OS on external storage connected to PCIe EM host bus adapter.

Refer to the PCIe EM host bus adapter documentation to create an OS boot disk.

Note –

Additional drivers for your server module might still need to be installed afterwards

to ensure full support with your server hardware. Refer to the appropriate Sun Blade X6275
M2 server module OS installation guide for more information on the minimum driver
requirements.

■

Configure network boot to load an OS to the server module node from an image on a
server configured for PXE (Preboot Execution Environment).

Refer to the appropriate server module OS installation guide for more information on using
this option.

Note –

In addition, each server module node supports the installation of an internally mounted

USB flash drive. Commercially available flash drives (also known as a 'thumb drive') can be used
to provide additional storage as long as they meet the required physical dimensions. See

Flash Drive” on page 50

See Also

■

“Flash Modules” on page 50

49

«
...
47
48
49
50
51
...
»

Содержание Blade X6275M2-BB

























































Отзывы:

Нет отзывов

Похожие инструкции для Blade X6275M2-BB

Бренд: Xerox Страницы: 2

Бренд: Xerox Страницы: 2

Бренд: Kathrein Страницы: 16

5big - Network NAS Server

Бренд: LaCie Страницы: 9

Бренд: LaCie Страницы: 14

Бренд: Buffalo Страницы: 2

Бренд: Buffalo Страницы: 80

Бренд: IBM Страницы: 98

SuperServer E300-9A-4C

Бренд: Supermicro Страницы: 109

DocuColor 45087638

Бренд: Xerox Страницы: 28

Бренд: 3Com Страницы: 122

Past Ethernet Combo Print Server PS-1216U

Бренд: Edimax Страницы: 23

RuggedJet RJ-4040

Бренд: Brother Страницы: 111

Бренд: Brother Страницы: 253

PCS400R Pro:Centric

Бренд: LG Страницы: 57

Бренд: LG Страницы: 104

Pro:Centric PCS200S

Бренд: LG Страницы: 40

Бренд: LG Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды