Sun Microsystems Blade X6275M2-BB, Руководство по установке

Страница: 37 / 56

Log in to the chassis CMM ILOM using a secure shell (SSH) session.
For example, enter the command:
$ ssh
username
@
CMMIPaddress
where username is a user account with administrator privileges and the CMMIPaddress is the IP
address of the CMM ILOM.
Tip –
The default ILOM administrator account user name is
root
and the password is
changeme
.
If this default administrator account has been changed, contact your system administrator for
an ILOM user account with administrator privileges.
Once you are successfully logged in to the CMM ILOM, you will see the ILOM prompt (
->
).
Enter the following command:
-> show /CH/BL0/NODE0/SP/network
where
BL0
represents a Sun Blade X6275 M2 server blade slot 0 in the chassis and
NODE0
is node
0 of the server. The CMM ILOM displays information about the server module, including its IP
address and MAC address.
The following example shows Blade 0, Node 0, server module information:
-> show /CH/BL0/NODE0/SP/network
/CH/BL0/NODE0/SP/network
Targets:
Properties:
type = Network Configuration
commitpending = (Cannot show property)
ipaddress =
IPaddress
<-- Node SP IP address
ipdiscovery = dhcp
ipgateway =
IPgateway
ipnetmask = 255.255.255.0
macaddress =
Macaddress
pendingipaddress =
IPaddress
pendingipdiscovery = dhcp
pendingipgateway =
IPgateway
pendingipnetmask = 255.255.255.0
Commands:
cd
set
show
->
Make a note of the network configurations, including the node's SP IP address.
You need to know the IP address of the node SP in order to log in directly to the node ILOM. By
default, the IP address of the node SP is configured using DHCP, if you want to set a static IP
address, see
“Configuring an ILOM IP Address” on page 41 .
Repeat Step 3 to find the IP address for the server's Node 1 service processor.
Replace
NODE0
with
NODE1
.
2
3
4
5
Obtaining the ILOM IP Address
37