S CLASS™ cutter
User’s Manual
Basic Operation
2-3
2.1.2
Configuration
The Configuration button gives access to the main menu. Pressing this button will
cause the cutter to go offline and suspend all operations in progress. The main menu
contains all submenus and access to tests and calibration routines.
The chosen tool will influence the configuration displayed.
Settings
: This menu offers access to different submenus that allow configuration of
the cutter’s operating parameters. Access to some of the submenus will be
determined by plotting language or tool type.
Tests & Setup
: This menu offers access to the different internal tests and calibration
routines. The calibration routines are used to adjust and fine-tune the cutter for the
chosen application. The internal tests are used for diagnostics.
Knife (pen or pounce) pressure
: This menu allows users to set or modify the
cutting pressure of the current tool.
Knife offset
: This menu allows users to set or modify the distance between the tip of
the knife and the axis. The default knife offset value is .45 mm. Knife offset is only
displayed when the chosen tool is a drag knife.
Pouncing gap
: The pouncing gap parameter is used to set or modify the distance
between the pounced holes. Pouncing gap only applies when the machine is in
“pounce” mode.
Velocity
: The velocity is used to set or modify the velocity of the tool.
User Selection
:
The S CLASS™ cutters include 8 user configurations, all of which
consist of the same parameters. Each configuration can have unique parameter
settings. This allows the cutter to be quickly and easily reconfigured for different types
of jobs or media. The touch screen can be used to change the user. However, user
configuration names can only be modified through Summa Cutter Control.
Содержание S 75
Страница 1: ...User s Manual Rev 05 05...
