S CLASS™ cutter
User’s Manual
Basic Operation
2-4
2.1.3
Online/Pause
Online and pause are two important concepts when using the S CLASS™ cutters. The
cutter is online only when the status of the touch screen is similar to figure 2-2.
FIG 2-2
2-2
ONLINE STATUS SCREEN
When online, the cutter can be addressed by the host computer, which means that the
cutter will execute cutting or plotting instructions issued by the host computer's
application software. As soon as any other button on the cutter is pressed, the cutter
pauses and can no longer be addressed by the host computer. However if the
computer was busy sending cutting data to the cutter it will be able to do so until the
buffer of the cutter is full.
If the pause button is pressed, then the tool can be moved around the working area
with arrow buttons.
Press
to raise or lower the tool (once push toggles the status each time).
Press
to set the cutter online again.
2.1.4
Actions
The “Actions” button is used to move the origin (start point for cutting), initiate a load
sequence, abort the cut in progress, or recut the last file.
¾
The “Set origin” instruction is used to move the knife origin.
¾
The “Load” instruction is used to initiate a load sequence.
¾
The “Reset” instruction performs a complete reset of the cutter.
¾
The “Special Load” instruction is used to initiate registration of the OPOS markers
just before a contour cut is begun.
¾
The Recut instruction recuts the last file sent to the cutter (provided that it fits in the
cutter’s memory (buffer).
Содержание S 75
Страница 1: ...User s Manual Rev 05 05...
