background image

Contents

1

 Manual Disclaimer................................................................................... 5

2

 About this document................................................................................ 6

2.1

 Function of the document............................................................................................................ 6

2.2

 Language.....................................................................................................................................6

2.3

 Illustrations...................................................................................................................................6

2.4

 Use of steps, lists and titles in this document.............................................................................. 6

2.5

 How to use this document............................................................................................................6

2.6

 Warnings, cautions and notes used in the document.................................................................. 6

2.7

 Related documents......................................................................................................................7

2.8

 Storage of this document and the related documents................................................................. 7

2.9

 Abbreviations............................................................................................................................... 7

2.10  Customer support........................................................................................................................ 7

3

 Description............................................................................................... 8

3.1

 Intended use................................................................................................................................ 8

3.2

 Overview and function of the device............................................................................................8

3.3

 Working principle......................................................................................................................... 9

3.4

 Overview of the controls............................................................................................................ 10

3.5

 Overview of the connections......................................................................................................11

3.6

 Type plate.................................................................................................................................. 12

4

 Safety.....................................................................................................13

4.1

 Restrictions................................................................................................................................ 13

4.2

 Approved user............................................................................................................................13

4.3

 General safety instructions........................................................................................................ 13

4.4

 Safety instructions for installation.............................................................................................. 13

4.5

 Safety instructions for use with gear units................................................................................. 14

4.6

 Safety instructions for use with hydraulic systems.....................................................................14

4.7

 Safety labels.............................................................................................................................. 14

4.8

 Instructions in case of a fire....................................................................................................... 14

4.9

 Warranty.................................................................................................................................... 15

4.10  Disposal..................................................................................................................................... 15

5

 Storage and transport............................................................................ 16

5.1

 Storage...................................................................................................................................... 16

5.2

 Off-site transport........................................................................................................................ 16

5.3

 On-site transport........................................................................................................................ 16

6

 Installation..............................................................................................18

6.1

 Installation - general instructions............................................................................................... 18

6.2

 Remove the packaging material................................................................................................ 18

6.3

 Connect the device.................................................................................................................... 18

6.3.1

 Connect the suction hose to the device.....................................................................19

6.3.2

 Connect the return hose to the device.......................................................................19

6.3.3

 Connect the suction hose to the gear unit or the hydraulic system........................... 19

Contents

UM_VP2500L_002_EN

3

Содержание VP2500L





































Отзывы: