Sumitomo Drive Technologies VP2500L, Руководство пользователя

Страница: 29 / 36

Clean the wear indicator sensor
Warning: Let the device cool down before you clean the wear indicator
sensor. The device can be hot.
Note:
• Clean the wear indicator sensor to prevent that the device shows incorrect
measurements when you change the oil or when you connect the device to
a different gear unit or hydraulic system.
• Collect the metal particles in a clean container for analysis.
Procedure
1. Drain the oil from the device. Refer to section
Drain the oil from the device
on page
26.
2. Remove the wear indicator sensor from the manifold.
3. Use a lint-free cloth to remove all metal particles from the wear indicator sensor.
4. Install the sensor. Refer to section
Install the wear indicator sensor
on page 22.
9.5
Maintenance
UM_VP2500L_002_EN
29