Sumitomo Drive Technologies VP2500L, Руководство пользователя

Страница: 27 / 36

Maintenance
General maintenance instructions
Limits
• If the maintenance task shows more than one limit, obey the limit that comes first.
Approved work and not approved work
• Do not do other maintenance than in the instructions in this document.
• Do not change or do repairs on the device without the written approval of S.D.T. If you
do make changes or repairs without written approval, S.D.T. is not liable.
• Do the maintenance tasks that the maintenance schedule shows.
• Only replace parts with parts from S.D.T.
• If you cannot follow the instructions or if you think that an instruction is not available,
speak to S.D.T.
Change the filter
Remove the filter
Warning: The filter can be hot. To prevent injury, wear protective clothing and
safety gloves.
Caution: Drain the oil from the device before you remove the filter. For
information on how to drain the oil, refer to section
Drain the oil from the
device
on page 26.
Procedure
1. Remove the filter (A).
a) Turn the filter counterclockwise by
hand until the filter comes loose.
Note: If you cannot
remove the filter by
hand, use a removal
tool.
b) Remove the filter.
c) Let the oil in the filter drain into a
container.
2. Discard the filter and the oil. Obey the
local environmental regulations.
9
9.1
9.1.1
9.1.2
9.2
9.2.1
A
Maintenance
UM_VP2500L_002_EN
27