Sumitomo Drive Technologies VP2500L, Руководство пользователя

Страница: 28 / 36

Install the filter
Caution: Install the correct filter. For information on the filter that you must
use, refer to section
Spare parts
on page 32.
Procedure
1. Install the filter (A).
a) Apply a small quantity of oil on the
seal ring (B).
Note: Use the same oil
as the oil that you will
use in the device.
b) Put the filter in position on the
device.
c) Turn the filter clockwise by
hand until the filter is sufficiently
tightened.
Cleaning schedule
Task Limit Instruction
Clean the device When the outer side of the de-
vice is dirty
Note: Clean the
outer side of the
device regularly
when the device
operates in an
environment with
high quantities of
dust
Refer to section
Clean the de-
vice
on page 28
Clean the wear indicator sensor • Every oil change
• When you connect the de-
vice to a different gear unit
or hydraulic system
Refer to section
Clean the wear
indicator sensor
on page 29
Clean the device
Warning: Let the device cool down before you clean the device. The device
can be hot.
Procedure
1. Clean the outer side of the device. Use water and soap.
Make sure that the switch box and the electric motor are free of dust.
9.2.2
A
B
9.3
9.4
Maintenance
28
UM_VP2500L_002_EN