Sumitomo Drive Technologies VP2500L Скачать руководство пользователя страница 5

Страница: 5 / 36

Manual Disclaimer

This Manual and its instructions and information do not purport to cover all details or

variations of the device and do not claim to provide for every possible contingency

met in connection with handling, installation, operation, or maintenance. Sumitomo Drive

Technologies does not make any representations, warranties or guarantees, express

or implied, as to the accuracy or completeness of the Manual. Users must be aware

that updates and amendments will be made from time to time to the Manual. It is

the user’s responsibility to determine whether there have been any such updates or

amendments. Neither Sumitomo Drive Technologies nor any of its directors, officers,

employees or agents shall be liable in contract, tort or in any other manner whatsoever to

any person for any loss, damage, injury, liability, cost or expense of any nature, including

without limitation incidental, special, direct or consequential damages arising out of or in

connection with the use of the Manual. The user and/or purchaser bears all risks. Should

further information be desired or should particular problems arise which are not covered

sufficiently for the users’ and/or purchaser’s purposes, the matter should be referred to in

writing to Sumitomo Drive Technologies.

Warning: Read and understand all instructions and information prior to any

handling including maintenance, installing or starting the device. Failure to

follow instructions could lead to damage, serious injury, or death.

• Only qualified and trained personnel should be involved with the storage (including

transport), commissioning, operation, installation (including removal), inspection,

maintenance and repairs of this device.

• Make sure all your personnel and operators of this device have been professionally

and adequately trained for safe working practices.

• Operators must wear adequate personal protective equipment.
• Ensure all international, EU, national and local safety regulations and codes are

followed when handling, maintaining, installing (including all related actions) the

device.

• Verify the compatibility of the device with the installation it is meant for.

Manual Disclaimer

UM_VP2500L_002_EN

Содержание VP2500L





































Результаты поиска

Содержание VP2500L

Отзывы:

Похожие инструкции для VP2500L

Бренды по названию

Популярные бренды

Sumitomo Drive Technologies VP2500L, Руководство пользователя

Результаты поиска

Содержание VP2500L

Отзывы:

Похожие инструкции для VP2500L

Бренды по названию

Популярные бренды