Sullair SUPERVISOR CONTROLLER, Руководство пользователя

Страница: 34 / 52

SUPERVISOR CONTROLLER™ USER MANUAL
SECTION 5
32
Figure 5-3: WIRING DIAGRAM—SUPERVISOR CONTROL After April, 2009
02250180-024 R00
NOTES
1. DASHED LINES INDICATE TYPICAL FIELD CONNECTIONS THAT VARY DEPENDING ON COMPRESSOR
BEING RETROFITTED AND IS FIELD WIRED. FACTORY WIRING IS SOLID.
2. DISPLAY E-STOP CONNECTION IS WIRED TO TERMINAL BLOCK INSIDE REAR COVER OF DISPLAY.
3. CHASSIS GROUND WIRE TO BE AS SHORT AS POSSIBLE
4. BELDEN TYPE 9842 4 COND. 2 TWISTED PAIR W/SHIELD OR EQUIVALENT. TO MATCHING TERMINALS
ON NEXT COMPRESSOR. REFER TO SUPERVISOR SEQUENCING PROTOCOL MANUAL.