Sullair ShopTek, Руководство пользователя интерфейса

Страница: 11 / 30

Section 2
S
HOP
T
EK
™
CONTROLLER USER INTERFACE MANUAL
13
02250180-094 R00
STARTUP PROCEDURES
2.1 INTRODUCTION
This compressor is equipped with a Controller for
controlling the compressor system operation, setting
the machine parameters and performing
maintenance operations. The Controller is designed
for the safe operation and protection of the
compressor system. When fault conditions occur,
the controller automatically shuts down the machine
before the conditions can cause damage to the
equipment. The Controller also contains features
that enable sequential interface with other machines.
2.2 CONTROLLER PANEL
LAYOUT
The Controller panel is shown in Figure 2-1 . The
controller panel consists of :
Display Screen for displaying machine status.
Start Pad —Large green pad button used to
start the compressor operation.
Stop Pad — Large red key pad used to stop
the compressor operation.
Up Arrow Pad —Used to navigate “up” the list
of display messages and to increase or change
parameter values for adjustments.
Down Arrow Pad —Used to navigate “down”
the list of display messages and to decrease or
change parameter values for adjustments.
Return/Reset Pad —Angled arrow key pad
used to return to upper menu when changing
parameters. A long hold is used to clear fault
messages.
Right Arrow Pad —Used to make selection in
menu screen and to change digits when making
changes to parameters.
Set Pad —Used to save changes to
parameters. The set pad is also used to manually
load or unload the compressor during operation.
Each of the controller components and functions is
described in detail in
Section 4 .
®
X
S
1
2
3
4
5
6 7 8 9 10 11
Figure 2-1: Controller Panel
1. Run Mode Indicator Light (Green)
2. Power On Indicator Light (Red)
3. Fault Warning Indicator Light (Red)
4. Display Panel
5. Stop Button
6. Start Button
7. Return/Reset Button
8. Cursor/Confirm Button
9. Up Button
10. Down Button
11. Set/Load/Unload Button
S