SA5052 Digital Multimeter User ‟s Guide
Shijiazhuang Suin Instruments Co., Ltd. 35
【
Config
】
+
【
Enter
】
key, which display
1: TRIG MENU.
Then press
【
Enter
】
key to enter
into menu and select option
1: READ HOLD
by
【
<
】
or
【
>
】
key. Press
【
Enter
】
key again
to show percentage and select suitable parameter by
【
<
】
or
【
>
】
key. Finally press
【
Enter
】
key to confirm. (2) To excute the read hold function, press
【
Shift
】
+
【
Digits
】
key.
● Sensitivity range setting is stored in volatile memory, default setting is 0.1% when
power-on or after remote interface reset.
3.5 System operation
3.5.1 Reading memory
At most 256 readings are allowed to be saved in internal memory. All reading are saved in
first-in-first- out order, so first returned reading is also the first saved reading. The memory
function is only available on front panel.
Reading memory can be selected together with all functions, math operations and read hold.
You also can change the function before enabling the reading memory.
Front panel operation:
storage function:
(1) To set storage numbers, press
【
Shift
】
+
【
Config
】
+
【
Enter
】
key and select option
2: SYS MENU
by
【
<
】
or
【
>
】
key
.
Then press
【
Enter
】
key, which displays
1: RDGS STORE
. Press
【
Enter
】
key again to show storage
numbers and select suitable parameter by
【
<
】
or
【
>
】
key. Finally press
【
Enter
】
key to confirm.
(2) To excute the store function, press
【
Shift
】
+
【
Recall
】
key. Mem annuiator on screen will
be on.
Recall function:
press
【
Recall
】
key to recall the first saved data and select next
storages by
【
<
】
or
【
>
】
key.
● Reading is saved in volatile memory, default memory is 10 groups, which will be cleared
when power-on or after remote interface reset.
3.5.2 System beep
In case of some conditions, the multimeter will beep. But you also can disable the beep on
front panel for some conditions.