SA5052 Digital Multimeter User ‟s Guide
Shijiazhuang Suin Instruments Co., Ltd. 33
You can trigger the multimeter using manual trigger or auto trigger. Each trigger has many
readings. Single triggering takes one reading, but you can set the readings number for each
trigger (50000 at most).
The processing of trigger
3.4.1 To select trigger source
You can trigger the multimeter from front panel using Single trigger, Ext Trig terminal
hardware trigger, auto trigger, or from the remote interface using BUS trigger, Ext Trig
terminal hardware trigger and instant internal trigger.
Auto trigger
Auto trigger is only enabled on front panel. The default power-on trigger mode is auto
trigger.
The auto triggering takes continuous readings as specified parameters setting (function,
range, resolution, etc.)
Front panel operation:
press
【
Shift
】
+
【
Sin/Ex
】
key to enable continuous trigger readings.
Single trigger
