Sturtevant Richmont Global 400mp, Руководство пользователя

Страница: 63 / 73

Global 400mp User Manual 63 of 72 v4.0
Chapter 7: EtherNet/IPTM 17 August 2016
Input (T->O) Connection Points
This section defines the connection points are used by Global 400mp to send output data to the
network. The connection points are in the range 110-129 and are grouped by their content.
•
51x: Last tightening data
•
53x: Current Global 400mp status
Input Connection Points for Last Tightening Data
The connection points in this group will contain data about the last tightening. As such, they are
not updated after a parameter or job selection until a tightening occurs.
510
Name Data Type Description
ARRAY of
STRUCT of: Last tightening data for each of the 4 interfaces. Each array entry
corresponds to an interface.
Tightening ID UDINT ID number of the last tightening
Time DT Timestamp of the last tightening
Job Sequence
Number UINT Sequence number of the running job.
Job Number USINT Instance number of job currently running. Ignored if 0.
Parameter USINT Instance number of the parameter that produced the tightening
Tightening Status BOOL Indicates if the last tightening was accepted as valid.
Count USINT Number of results performed in the current batch for the parameter.
Batch USINT Number of results required for a batch in the parameter.
Torque Unit ENGUNIT Unit used for torque fields
Torque REAL Torque of the tightening just performed.
Min Torque REAL Minimum torque required for a tightening in the parameter.
Max Torque REAL Maximum torque required for a tightening in the parameter.
Angle UDINT Angle of the tightening just performed.
Min Angle UDINT Minimum angle required for a tightening in the parameter.
Max Angle UDINT Maximum angle required for a tightening in the parameter.
Total size: 172 bytes
511
Name Data Type Description
ARRAY of
STRUCT of: Last tightening data for each of the 4 interfaces. Each array entry
corresponds to an interface.
Tightening ID UDINT ID number of the last tightening
Time DT Timestamp of the last tightening
Job Sequence
Number UINT Sequence number of the running job.
Job Number USINT Instance number of job currently running. Ignored if 0.
Parameter USINT Number of the parameter that produced the tightening
Tightening Status BOOL Indicates if the last tightening was accepted as valid.
Count USINT Number of results performed in the current batch for the parameter.
Batch USINT Number of results required for a batch in the parameter.
Torque Unit ENGUNIT Unit used for torque fields
Torque REAL Torque of the tightening just performed.
Angle UDINT Angle of the tightening just performed.
Total size: 108 bytes