Sturtevant Richmont Global 400mp, Руководство пользователя

Страница: 22 / 73

Global 400mp User Manual 22 of 72 v4.0
Chapter 3: Configuring the unit 17 August 2016
Introduction
Most of the features of the Global 400mp can be configured directly on the unit. The
configuration, along with parameter and job selection is available from the unit menu. The menu
is available from the Run screen by pressing function key 4 or ENT.
The navigation keys are used primarily to move from entry to entry on a screen. The numeric
keypad is used for any data entry and occasionally to assist in navigation. When describing the
function keys for a screen, [ENT] or [ESC] will be listed next to the key if the ENT or ESC
buttons perform the same operation. The ESC key is generally used to cancel changes or exit a
screen without performing an action.
Saving Configuration Changes
Configuration editing screens will always have SAVE as function key 3 and CANCEL as
function key 4. You may also press ESC for Cancel. If you enter a screen and have not made
any changes or do not want to save the changes you have made, press
CANCEL . To commit
changes, press SAVE . Even if you have not made any changes, saving will update the last
modified time for the item.
Entering letters
The unit has a special screen that allows using the numeric
keypad to enter letters for fields that allow them, such as a
parameter name. To get to this screen, press [ENT] when
cursor is on a row with such a field. Lowercase letters
cannot be entered from the unit but can be entered through
the PC software application.
The left side of this screen shows the letters associated with
each number. Pressing a number repeatedly will cycle
through the letters associated with the number followed by
the number itself. Pressing a different number will commit
the character to the new value and add the first letter
associated with the new number pressed. Pressing the left arrow will remove the last entered
character. Pressing the up arrow will toggle between entering letters and numbers or just
numbers.
Pressing the right arrow will commit the current character and move to the next position. You do
not have to use the right arrow for every letter. However, there are two situations when you must
use the right arrow. The first is to enter a blank space, which is accomplished by pressing the
right arrow twice in a row. The second is to enter a name with two letters in a row associated
with the same number. For example, to enter “TOOL 1”, you would need to press the following
sequence of keys:
Figure 9: Letter Entry screen