101515 REV C
1-11
Operating Instructions
CLIK-TITE CONNECTORS
5A
5B
5C
5D
6B
6C
Figure 5: Clik-Tite
®
Connectors
The TP600 & 700 Series T/Pump is supplied with Clik-Tite
®
connectors.
To connect and disconnect Clik-Tite
®
connectors from hose to pad:
1. Insert male fittings into female fittings with a twisting motion
(Figures 5A and 5B).
2. When fittings are fully inserted, snap locking ring into place
(Figures 5C and 5D).
3. To disconnect, reverse the procedure.
4. To open or close the hose pinch clamps:
•
Open the clamp by pushing the serrated end (Figure 6B).
•
Close the clamp by pressing the clamp together (Figure 6C).
Note:
Refer to Figure 1B on
when connecting multiple pads.
