Maintenance Procedures
Chapter 4
55
4.19 BRAKE /STEER PEDAL REPLACEMENT
1. Raise the bed to the high position, lock casters and unplug the power cord.
2. Bring pedal to horizontal position (neutral) and remove the machine screw (
A
) located at the
end of the right or left pedal shaft.
Note that in prior versions (beds with serial number
[
C01340), the GO
BED
is equipped with a protective cap instead of a machine screw. If it's
the case with your bed, disregard the following note and proceed with step 5.
N
N
O
O
T
T
E
E
Before replacing the machine screw, apply medium strength tread locker (blue) on its tread.
When reassembling, the machine screw must first be inserted and tightened
before
tightening
the pressure screws mentioned in steps 5 and 6.
3. Remove the pressure screw (
G
, fig. 4.20, page 55) located on the right or left socket (
H
, fig.
4.20, page 55) of the 5th wheel activation lever (
J
, fig. 4.20, page 55).
N
N
O
O
T
T
E
E
Before replacing the pressure screw, apply medium strength tread locker (blue) on its tread.
4. Remove the pressure screw (
B
) located on the head or foot locking lever (
E
).
N
N
O
O
T
T
E
E
Before replacing the pressure screw, apply medium strength tread locker (blue) on its tread.
5. Remove the defective pedal. Leave the pedal sleeve (
C
) in place. Keep the two nylon
washers (
D
).
N
N
O
O
T
T
E
E
Apply grease on the new pedal shaft before placing it.
6. Reverse the above steps to install replacement pedal. Be sure to position the pedal
horizontally (neutral) before inserting its shaft into the sockets of the locking lever and the
5th wheel activation lever. Test pedal for proper operation.
N
N
O
O
T
T
E
E
When inserting the pedal shaft into the sockets, make sure that the locking lever (
E
) is vertically
positioned and that the upper flat part of the 5th wheel activation lever (
J
, fig. 4.20, page 55) is
parallel to the floor (bring the wheel near the floor by exerting a pressure on it to ease this
operation).
Figure 4.19
A
B
B
C
C
D
D
E
Содержание The Go BED FL17E
Страница 2: ......
