Stryker 7600-000-050, Руководство по обслуживанию

Страница: 35 / 78

5. Using diagonal pliers, cut and discard the cable tie that secures the battery cable to all of the actuator cables.
6. Using a #2 Phillips screwdriver, unscrew the four screws (A) that secure the battery to the litter frame (Figure 14).
N No otte e -- Support the battery while removing the screws so the battery does not fall.
7. Remove the battery.
8. Dispose of the battery according to local laws and procedures.
9. Reverse steps to reinstall.
10. Verify proper operation of the product before returning it to service.
A
A
A
A
F Fiig gu urre e 1 14 4 –– B Ba atttte erryy
P Po ow we err cco orrd d rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• #2 Phillips screwdriver
P Prro occe ed du urre e::
1. Apply the brakes.
2. Raise the product to the highest height position.
3. Power down the bed and unplug the power cord from the wall outlet.
4. Remove the two screws (A) that secure the power cord connection cover (B) to the litter frame (Figure 15).
5. Remove and discard the external power cord (C) from the internal power cord (Figure 15).
6. Reverse steps to reinstall.
7. Verify proper operation of the product before returning it to service.
SK-7600 REV 06 31 EN