Stryker 7600-000-050 Скачать руководство пользователя страница 22

Страница: 22 / 78

errvviicce

wlle

err ((b

acckkrre

esstt)) a

accttu

atto

orr rre

plla

acce

ntt

ollss rre

uiirre

d::

•

Small flat screwdriver

•

Needle nose pliers

Prro

occe

urre

e::

1. Apply the brakes.

2. Raise the product to the highest height position.

3. Power down the bed and unplug the power cord from the wall outlet.

4. Using the CPR release, lower the Fowler (backrest) to a flat (0 degrees) position.

5. Using a small flat screwdriver, push in both locking tabs to remove the cable retainer on the Fowler (backrest) actuator

electrical quick connector.

6. Unplug the connector.

7. Using one hand to support the Fowler (backrest) actuator and a small flat screwdriver, open the CPR cable cover on the

Fowler (backrest) actuator.

8. Pulling back on the CPR cables, remove the CPR cable mechanism from the Fowler (backrest) actuator.

9. Using needle nose pliers, remove and discard the rue ring cotter pins (A) (Figure 3) from each clevis pin.

Fiig

urre

e 3

3 –– F

wlle

err ((b

acckkrre

esstt)) a

accttu

atto

orr

10. Using one hand, support the Fowler (backrest) actuator and remove and save the head end clevis pin (B) (Figure 3)

then allow the Fowler (backrest) actuator to pivot down.

11. Using one hand, support the Fowler (backrest) actuator and remove and save the foot end clevis pin (C) (Figure 3) and

spacer.

12. Remove and discard the Fowler (backrest) actuator.

13. Reverse steps to reinstall.

otte

e -- Make sure that the cable ties stay in the same position during reinstallation.

14. Verify proper operation of the product before returning it to service.

SK-7600 REV 06

Содержание 7600-000-050















































































Результаты поиска

Содержание 7600-000-050

Отзывы:

Бренды по названию

Популярные бренды

Stryker 7600-000-050, Руководство по обслуживанию

Результаты поиска

Содержание 7600-000-050

Отзывы:

Бренды по названию

Популярные бренды