Stryker 7600-000-050, Руководство по обслуживанию

Страница: 33 / 78

N Nu urrsse e cco on nttrro oll p pe en nd da an ntt rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• Diagonal pliers
P Prro occe ed du urre e::
1. Apply the brakes.
2. Raise the product to the highest height position.
3. Power down the bed and unplug the power cord from the wall outlet.
4. Using diagonal pliers, cut and discard the cable tie that secures the fowler (backrest) actuator cable to the wire routing
channel.
5. Remove the three cable routing covers that secure the gatch (legrest) actuator cable to the litter frame.
6. Unplug the nurse control pendant cable from the junction box.
7. Dispose of the nurse control pendant.
8. Reverse steps to reinstall.
9. Verify proper operation of the product before returning it to service.
S Siid de erra aiill cco on nttrro oll p pa an ne ell ((iin nssiid de e a an nd d o ou uttssiid de e ssiid de erra aiill)) rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• Flat screwdriver
P Prro occe ed du urre e::
1. Apply the brakes.
2. Raise the product to the highest height position.
3. Unplug the power cord from the wall outlet.
4. Using a flat screwdriver, carefully push in and up in the slotted access hole to remove the control panel from the siderail
hoop.
5. Unplug the cable connecting the siderail control panel to the junction box.
6. Remove and discard the siderail control panel.
7. Reverse steps to reinstall.
8. Verify proper operation of the product before returning it to service.
C Co on nttrro oll b bo oxx rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• Diagonal pliers
• Small flat screwdriver
• 3/8 in. drive ratchet
• 10 mm socket
• 10 mm combination wrench
P Prro occe ed du urre e::
1. Apply the brakes.
2. Raise the product to the highest height position.
3. Power down the bed and unplug the power cord from the wall outlet.
SK-7600 REV 06 29 EN