Stryker 7600-000-050 Скачать руководство пользователя страница 24

Страница: 24 / 78

2. Support the head end litter cross brace (A) to support the head end litter (Figure 5).

3. Power down the bed and unplug the power cord from the wall outlet.

4. Using a small flat screwdriver, gently push in both locking tabs to remove the cable retainer on the head end lift actuator

electrical connector.

5. Unplug the connector.

6. Using needle nose pliers, remove and discard the rue ring cotter pins (B) from each clevis pin (Figure 5).

7. Using one hand, support the head end lift actuator and remove and discard the head end clevis pin (C) then allow the

head end lift actuator to pivot down (Figure 5).

8. Using one hand, support the head end lift actuator and remove and discard the foot end clevis pin (D) and spacer

(Figure 5).

9. Remove and discard the head end lift actuator.

10. Reverse steps to reinstall.

11. Verify proper operation of the product before returning it to service.

Fiig

urre

e 5

5 –– H

d e

d lliifftt a

accttu

atto

orr

ott e

d lliifftt a

accttu

atto

orr rre

plla

acce

ntt

ollss rre

uiirre

d::

•

Small flat screwdriver

•

Needle nose pliers

Prro

occe

urre

e::

1. Apply the brakes.

SK-7600 REV 06

Содержание 7600-000-050















































































Результаты поиска

Содержание 7600-000-050

Отзывы:

Бренды по названию

Популярные бренды

Stryker 7600-000-050, Руководство по обслуживанию

Результаты поиска

Содержание 7600-000-050

Отзывы:

Бренды по названию

Популярные бренды