Stryker 7600-000-050, Руководство по обслуживанию

Страница: 29 / 78

4. Using a 3/8 in. drive ratchet and 13 mm socket, remove and save the nut and washers from the top of the fifth wheel
assembly.
5. Remove and discard the fifth wheel assembly.
6. Reverse steps to reinstall.
N No otte e -- You may have to compress the fifth wheel assembly slightly to reinstall.
7. Verify proper operation of the product before returning it to service.
F Fiifftth h w wh he ee ell llu ub brriicca attiio on n ((o op pttiio on n))
T To oo ollss rre eq qu uiirre ed d::
• 5 mm hex wrench
• 13 mm combination wrench
• Small jack
• Polyurea based grease
P Prro occe ed du urre e::
1. Apply the brakes.
2. Raise the product to the highest height position.
3. Power down the bed and unplug the power cord from the wall outlet.
4. Using a small jack, raise the base frame high enough so that the fifth wheel does not touch the floor.
5. Using a 13 mm combination wrench, remove and save the bolt (C), nut (B), and washers (A) from the fifth wheel (D)
(Figure 9).
6. Remove and apply the polyurea based grease to the wheel bearing (E) surface (Figure 9).
7. Reverse steps to reinstall.
8. Verify proper operation of the product before returning it to service.
C
D
E
A
B
F Fiig gu urre e 9 9 –– F Fiifftth h w wh he ee ell llu ub brriicca attiio on n
H He ea ad d e en nd d ssiid de erra aiill g ga ass ccyylliin nd de err rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• Large flat screwdriver
SK-7600 REV 06 25 EN