RotoPol-31/-35
Instruction Manual
Water for wet grinding and disc cooling may be supplied from the
water mains or a Recirculation Cooling Unit.
Supplying Water
RotoPol (RotoPol-31)
c
Water inlet tube
d
Water outlet tube
Mount the straight end of the pressure hose onto the water
inlet tube (upper) in the hose box on the back of
RotoPol-31/ -35:
Connection to Water Mains
−
Insert the filter gasket in the coupling nut with the flat
side against the pressure hose.
−
Tighten the coupling nut completely.
Mount the other end of the pressure hose on the water mains
tap for cold water:
−
Mount the reduction ring with gasket on the water mains
tap, if necessary.
−
Introduce the gasket and tighten the coupling nut
completely.
IMPORTANT
Only connect to cold water.
Determine the best arrangement for the outlet. If the drain
hose is directed parallel to the machine, the drain elbow pipe
should be mounted on the water outlet tube (lower) in the
hose box on the back of RotoPol-31/-35.
Connection to Water Outlet
5
Содержание ROT31
