Struers ROT31, Инструкция по эксплуатации

Страница: 18 / 145

RotoPol-31/-35
Instruction Manual
1. Advanced Operations
RotoPol-31/35 is designed for MD-Discs of 300 mm dia., wet
grinding discs of 305 mm dia. and polishing discs of 300 mm dia.
However, the whole range of Struers discs can be mounted.
Selection of Disc
„
For automatic preparation of specimen holders mounted in
specimen movers, only aluminium discs should be used. See
the instructions for RotoForce-3 or RotoForce-4.
„
When disc cooling is selected, only aluminium discs should be
used.
Disc cooling should be selected in the setting whenever
RotoPol-31/-35 is used intensively for:
Disc Cooling
„
Preparation of specimen holders.
„
Polishing time longer than 5 minutes.
„
Successive preparation of several specimen holders on the
same disc.
Important
The set-up menu setting can only be implemented
when the machine has been stopped.
„
Press MENU
m
to move from one screen to another.
Setting the Disc Cooling
„
When in the DISC COOLING menu, press SELECT
L
:
14
„
Press STOP
o
when the desired setting appears, or press
MENU
m
repeatedly until the operation menu appears again.
„
WHEN WATER OFF should normally be selected when disc
cooling is applicable.
„
ALWAYS ON should only be selected for special applications.
DISC COOLING
WHEN WATER OFF
DISC COOLING
WHEN WATER OFF
D U
L ˆ
DISC COOLING
ALWAYS ON
ˆ L ˆ
DISC COOLING
ALWAYS OFF
ˆ L