Struers Prepamatic-2, Инструкция по эксплуатации

Страница: 8 / 242

Prepamatic-2
Instruction Manual
4
Open the electric connection box and connect a 4-lead cable* in the
following way:
PE: earth
L1: phase
L2: phase
L3: phase
*Please see the section on
Technical Data
for recommended cable
specifications.
The direction of rotation for the grinding and polishing discs must be
counter-clockwise. This is checked as following:

Check that there is nothing to prevent the carrousel from turning,
e.g. transport protection.

Make sure that no specimen holder or specimen mover plate is
mounted.

Switch on the main switch (on the right hand side). If the safety
guards are closed, the carrousel will turn, and the reference
position of the carrousel can be found.

Select a preparation program in the STRUERS METHODS.

Press "Start" and check the direction of rotation of the
preparation discs.

Press "Stop" after the check is completed.
The discs should rotate counter-clockwise, see also the indication
arrows on the supporting discs.
If the direction of rotation is clockwise, switch off Prepamatic-2 and
unplug the machine.

Change two of the phases.

Repeat the rotation check.
Connection to Power Supply
IMPORTANT
Check that the mains voltage corresponds to the voltage stated on the type
plate on the back of the machine.
Direction of Rotation