Struers Discotom-50, Инструкция по эксплуатации

Страница: 12 / 156

Discotom-50
Instruction Manual
The flush hose, and a valve for cooling and cleaning, are located
on the front of the machine.
Cooling Valve Positions
During cutting, the valve is placed in the vertical position to cool
the cut-off wheel. During cleaning the valve is turned clockwise to
regulate the water flow of the hose.
8
For cut-off wheel cooling,
position the knob
vertically with dot
upwards.
Cutting position
Flush hose and
Cooling valve
Turn the knob clockwise
to activate flushing
mode. Adjust flow while
flushing the cutting
chamber.
Cleaning positions
Turn the knob clockwise
to vertical position for
flushing the cutting
chamber with maximum
flow.
Please Note
After cleaning, turn cooling valve back to vertical position. START
s
can
not be activated unless the cooling valve is in the cutting position.