StreamLight FIRE VULCAN, Руководство по обслуживанию

Страница: 8 / 43

SECTION III
TESTING/REPLACING THE BATTERY
Test for Charge Power to the Battery
A. Remove the facecap from the Vulcan as described in Section I.
B. Place a multimeter into the DC Volts position.
C. Place the red meter lead onto the positive (red) battery terminal and the black meter
lead onto the negative (black) battery terminal.
Negative
Terminal
Positive
Terminal
D. Note the voltage.
E. Place the Vulcan into a known good charge rack, and connect it to a power supply.
F. Allow the Vulcan to charge for 5 minutes.
G. Leave the Vulcan charging in the charge rack and re-test the battery as described in
Step C above.
H. The voltage of the battery while charging in the charge rack should be at least .20 Volts
above the voltage noted in Step D above.
1. If the voltage is at least .20 Volts greater than the voltage noted in Step D, proceed
to the Quick Battery Test.
2. If the voltage is less than .20 Volts greater than the voltage noted in Step D, proceed
to Testing the Printed Circuit Board, located in Section IV.
- 8 -