StreamLight FIRE VULCAN, Руководство по обслуживанию

Страница: 21 / 43

Negative
Charge Lead
Positive Battery
and Charge Leads
3. Align the holes in the switch/PCB with the mounting standoffs and secure the
assembly with the Phillips screws. (Note: Insure that there is an insulating washer
under the head of the mounting screw located on the side with the positive leads.
4. Reconnect the battery leads and test the switch for function. After confirming the
switch functions properly, remove the battery leads and proceed to Step D. If the
switch does not function properly, readjust the contacts as described on page 19.
D. Replace the battery clamp above the battery, but do not secure it.
1. Route the positive battery and charge leads between the Vulcan body and the
battery clamp on the right side of the Vulcan (handle facing away from you).
2. Route the negative charge lead (only) between the Vulcan body and the battery
clamp on the left side of the Vulcan (handle facing away from you).
E. Secure the battery clamp into place with the two Phillips mounting screws.
F. Reattach the battery leads.
1. Attach the positive (red) lead to the positive battery terminal. (Note: Use needlenose
pliers if necessary.
2. Attach the negative (black) lead to the negative battery terminal.
G. Place the lamp into the lamp socket (Note: Detailed instructions are in Section ll).
H. Reassemble the Vulcan as described in Section l.
- 21 -