StreamLight FIRE VULCAN, Руководство по обслуживанию

Страница: 35 / 43

FIRE VULCAN GENERAL NOTES
Troubleshooting Note
Troubleshooting the Fire Vulcan system involves essentially the same process as
troubleshooting the standard Vulcan system. Most repair issues (except the battery, lamp and
charger) will require the replacement of the entire switch/pcb and LED tail light board
assembly.
Tail Light Lenses
The tail light lenses on the rear of the body of the Fire Vulcan are sonically welded in place
and are not field serviceable. The integrity of the lenses must be maintained to assure the
hermetic integrity and class rating of the flashlight. If the lenses are damaged the entire
flashlight should be returned to Streamlight for factory service.
Tail Light Lenses
Tail Light Issues
If the taillights operate improperly or fail to light the wiring connection between the tail light PC
boards and the switch/PC board should be inspected. If the connections are intact and the tail
light PC boards are in place there may be a misplaced switch/PC board jumper. See the
jumper position table on page 43 for the correct positioning of each jumper. If the problem
persists the entire switch/PC board and tail light PC board will need to be replaced (p.38).
- 35 -