Stratus ftServer V 2404, Руководство по установке оборудования

Страница: 30 / 92

Stabilizing the System
1-18 Stratus ftServer V 2404, V 4408, V 6408, and V 6512 Hardware Installation Guide (R004S)
Figure 1-15. Equipment Label
Check that the Stratus serial number (S/N) on the equipment label matches the Stratus
serial number on the packing list. If the numbers are not identical, contact the CAC
before continuing to unpack the cabinet.
Stabilizing the System
If temperature and humidity changes have been extreme during transit, the ftServer
system might develop condensation. Therefore, before you install and power on the
system, you must inspect it for condensation and, if necessary, stabilize it. To stabilize
a system, let it stand, unpacked and without its plastic wrap, in the open air of an office
environment.
1. Inspect the system for condensation. Use the guidelines in Table 1-1 to determine
if the system requires a stabilization period before you install it and power it on.
Table 1-1. Stabilization Guidelines
Condition Stabilization Period
Desiccant is present.
No condensation is on the plastic bag or system surfaces. None
Desiccant is present.
Condensation is on the plastic bag or system surfaces. 4 hours
vdco021a