Stratus ftserver 3300, Руководство по планировке объекта

Страница: 29 / 138

Space Planning 3-1
Chapter 3
Space Planning
3-
For information about planning sufficient space for your ftServer system, see:
•
“Room Requirements” on page 3-1
•
“Planning for Cables” on page 3-2
Room Requirements
If you have ordered an ftServer 6600 system already assembled in a Stratus cabinet,
see
Table A-1 , which provides the dimensions of the 24U and 38U cabinets. Otherwise,
determine the dimensions of the cabinet in which you will install the system.
To ensure that the installation site provides a properly equipped, cooled, and sized
environment, make sure that the site:
•
Provides clearances for air circulation and servicing the system
Locate the front and rear of the system at least 2.5 ft (0.76m) away from walls and
other obstructions.
•
Maintains reasonable temperature and humidity levels and has a thermometer and
humidistat to monitor room temperature and humidity
•
Is as free of dust as possible
Dust buildup in the system can impede air circulation and heat transfer, causing
components to become less reliable as the ambient temperature rises.
•
Provides a table or desktop for external devices such as a telephone, tape drives,
and an external monitor or LCD monitor, keyboard, and mouse
•
Provides cutouts in the floor for routing cables, if the site has an elevated floor
C A U T I O N
!
Do not place the system in an area of high electrostatic
discharge. Static electricity may damage components.
Do not locate components near transformers or other
electromagnetic devices.