GUTTER INSTALLATION
Figure 42
Figure 43
Figure 44
Figure 45
Figure 46
Figure 47
Gutter components are detailed in the list below. First prepare
each of the gutters ready for installation. Select the location of the
downpipe and install the downpipe outlet into one of the gutters.
Place the outlet up against the back of the gutter approximately
40mm from the end and trace around the outlet. Cut out the
appropriate sized hole to ensure the outlet fits snugly. Attach the
downpipe outlet and stop ends with rivets (Figure 42). Seal around
the edge of the downpipe outlet and stop ends with silicone (Figure
43).
Using tin snips make a pair of cuts 20mm apart, 150mm from the
end of the gutter. Bend the tab back over itself (Figure 44). Repeat
for the other end and evenly space with a maximum spacing of
1200mm (Figure 45). Attach gutter to top rail with rivets (Figure
45). Repeat for opposite gutter. Return to Step 18.
After Step 18 has been completed you can install the gutter brackets.
Place the first bracket under the lip of the gutter with the flat end
in the middle of the second roof sheet pan from the edge, bend the
bracket to match the angle. Place a small amount of silicone on the
underside of the bracket and attach with a rivet (Figure 46). Repeat
for remaining brackets placing one in every fourth pan (Figure 47).
Place a small amount of silicone on the top of each rivet to seal.
After both gutters are attached return to Step 19.
20
2 x VF gutters
2 x Left gutter stop end
2 x Right gutter stop end
8 x GP straps
2 x Downpipe outlet
2 x Downpipe bracket
2 x Downpipe
Содержание Flat Roof Homesheds
Страница 22: ...NOTES...
