Stratasys Dimension Elite, Руководство пользователя

Страница: 41 / 66

37
Clean door
The door glass can be cleaned with any commercial glass cleaner.
Empty the purge container
The plastic purge container is attached to the right side of the modeling envelope rear wall, see
Figure 24.
1. Remove the purge container by grasping it and pushing it upward to release it from its three
mounts. See Figure 24.
Figure 24: Purge container location
2. Pull the container towards you and out of the chamber.
3. Empty the container and reinstall on 3 mounts.
Note: A full purge container may impact part quality.
CAUTION:
When reinstalling the container, make sure that it locks on all three mounts
and hangs flush with the chamber wall to avoid damage.