Stratasys Dimension Elite, Руководство пользователя

Страница: 23 / 66

19
7. Use the three functions listed above to set your IP address.
8. After setting the final digit of the Internet Protocol (IP) address, move the cursor one more place
to the right. The cursor moves to the Netmask (NM) address. Follow the same steps for setting
the Netmask (NM) and Gateway (GW) addresses.
9. When you have finished setting the addresses, press
Done
. The display will show:
Change IP,
Netmask and Gateway?
10. Press
Yes
. The panel then displays
Resetting Network
.
11. Press
Done
until
Idle
is displayed.
Establish communication:
1. From your workstation, start CatalystEX.
a. From the
General
tab, click the
Manage 3D Printers
button.
b. Click the
Add from Network
button in the lower right corner of the
window.
c. A new window,
Add 3D Printer
, should list your printer (identified
by its UDN). Click on the printer in this window and enter a name
and location of your choice in the lower portion of the window.
d. Click
Add Printer
to complete. Close the
Add 3D Printer
window.
2. If your printer is not displayed in the
Add 3D Printer
window, you will need to add the printer
IP address manually.
a. From the
General
tab, click the
Manage 3D Printers
button.
b. Click the
Add Manually
button in the lower right corner of the
window.
c. In the
Add 3D Printer
window, enter a name and location of your
choice in the appropriate fields.
d. Enter the IP Address for your printer in the appropriate field. It will
be the same address as entered in step 6.
e. Select your printer type from the drop down list.
f. Click
Add Printer
and close the
Add 3D Printer
window.
3. If you are unable to connect the printer to your workstation, contact your Network
Administrator.
Installing System Software on printer
1. From the display panel, press
Maintenance
.
2. Press
System
.
3. Press
Load Upgrade
.
“Send upgrade from workstation”
and the printer IP address will be
displayed.
4. From your workstation, open CatalystEX by double clicking on the CatalystEX icon.
5. Click the
Printer Services
tab.
6. Select your printer from the drop down list then click the
Update Software
button.
Note: If you only have one printer connected, it will be the only printer in the list.