Stratasys CleanStation DT3, Руководство пользователя

Страница: 3 / 17

DT3 CleanStation
DOC-01121 Rev. A 2-3
Contents
1 Introduction 4
1.1 About this Guide 4
1.2 For More Information 4
2 Specifications 5
3 Safety Guidelines 6
3.1 Alkaline Cleaning Solution Safety Instructions 6
3.1.1 Preparing the Alkaline Cleaning Solution 6
3.2 Waste Disposal 6
4 Installation 7
4.1 Selecting a Location 7
4.2 Connecting the Drainage Hose 7
5 Operating Instructions 8
5.1 Filling the Tank 8
5.2 Adding Alkaline Cleaning Solution to the Tank 8
5.3 Powering On the DT3 CleanStation 9
5.4 Using the Control Panel 9
5.4.1 Setting the Timer 10
5.4.2 Starting the Cleaning Cycle 10
5.4.3 Stopping the Cleaning Cycle 10
5.5 Removing Printed Models 10
5.6 Draining the Tank 11
5.6.1 Draining Water 11
5.6.2 Draining Alkaline Cleaning Solution 11
6 Maintenance 12
6.1 General Maintenance 12
6.2 Disassembling the Unit for Cleaning 12
6.2.1 Cleaning the Pump Suction Strainer 12
6.2.2 Cleaning the Manifold 14
6.3 Re-Assembling the Cleaning Station 14
7 Troubleshooting 15
7.1 The Control Panel is Blank or the Cleaning Station Does Not Run 15
7.2 Printed Models Take a Long Time to Clean 16
7.3 Error Messages on the Control Panel 16
7.4 The DT3 CleanStation Stops Mid-Cycle 16